|
|  |
34785-Martinoni sideplate-G.S.A copy of the flush mounted sideplate from my own original Pietro Martinoni pocket pistol. Inlet fully into the panel and finished flush to the wood surface. German silver. Not engraved.
|
|
|
|
|
|  |
SP-020-B - Brass sideplate A sideplate is very common for English fowlers. 5 5/8" long x 1 tall. Bolt spacing is 3 1/8". *Only one available now.*
|
|
|
|
|
| |
SP-040-B - Brass sideplate A sideplate is very common for Lancaster school rifles and pistols. 4 5/8" long x 1 tall.
|
|
|
|
|
| |
SP-040-GS-German Silver Lancaster plateGerman silver Lancaster School side plate common to many gunsmiths of the school. Used widely and throughout the life of the longrifles made from this school. 4-7/8" x 1".
|
|
|
|
|
| |
SP-040-I - SteelA sideplate is a very common for the Lancaster school. 4 7/8long x 1 tall.
|
|
|
|
|
|  |
SP-060-B - Brass-Sideplate This sideplate was commonly used by gunsmiths A. Verner, and Shuler in the Bucks County, PA area. Plate measures 4 7/8 x 1
|
|
|
|
|
| |
SP-060-GS - German silver- SideplateThis sideplate was commonly used by gunsmiths A. Verner and Shuler in the Bucks County, PA area. Plate measures 4 7/8 x 1
|
|
|
|
|
| |
SP-060-I - Steel- SideplateThis sideplate was commonly used by gunsmiths A. Verner and Shuler in the Bucks County, PA area. Plate measures 4 7/8 x 1
|
|
|
|
|
|  |
SP-1-B Sideplate in brassSaw cut sideplate in brass. 5 1/8" long by 1 1/16 " wide. 2 15/16" (or less) hole center locations. (only one available).
|
|
|
|
|
|  |
SP-1-GS Sideplate in German silverSaw cut sideplate in German silver. 5 1/8" long by 1 1/16 " wide. 2 15/16" (or less) hole center locations. (Five available).
|
|
|
|
|
|  |
SP-100-B - Brass SideplateAn early high quality casting for smoothbores common to English and Germanic rifles and fowlers. 5-3/8 x 1-1/8
|
|
|
|
|
| |
SP-100-GS -German silver SideplateAn early high quality casting for smoothbores common to English and Germanic rifles and fowlers. 5-3/8 x 1-1/8
|
|
|
|
|
| |
SP-100-I - Steel SideplateAn early high quality casting for smoothbores common to English and Germanic rifles and fowlers. 5-3/8 x 1-1/8
|
|
|
|
|
|  |
SP-1700-I Steel sideplate L&R made for RH MantonRight Hand Manton locks #15090 and #1510
|
|
|
|
|
|  |
SP-1733-B Pistol sideplate in brass This is a copy of an original 1733 French dragoon pistol sideplate in brass. Made to fit L&R Classic or Large Siler locks. 4 3/16" long X 7/8" wide. Bolt centers are 2 5/8" or less.
|
|
|
|
|
| |
SP-1733-GS Pistol sideplate in German silverThis is a copy of an original 1733 French dragoon pistol sideplate in brass. Made to fit L&R Classic or Large Siler locks. 4 3/16" long X 7/8" wide. Bolt centers are 2 5/8" or less.
|
|
|
|
|
| |
SP-1733-I Pistol sideplate in iron This is a copy of an original 1733 French dragoon pistol sideplate in iron. Made to fit L&R Classic or Large Siler locks. 4 3/16" long X 7/8" wide. Bolt centers are 2 5/8" or less.
|
|
|
|
|
|  |
SP-1800-B Brass sideplate L&R made for LH Manton locks Left Hand Manton locks #15110 and #15120
|
|
|
|
|
| |
SP-1800-I Steel sideplate L&R made for LH Manton locks Left Hand Manton locks #15110 and #15120
|
|
|
|
|
|  |
SP-200-B - Brass sideplateThis side plate was copied from an original English styled musket that was made in America. Measures 5-3/4 long x 1 1/4 tall. Hole spacing is about 3 3/8". It can be moved a little longer or shorter since the holes are not drilled yet. Will fit larger locks like the Chambers Round faced English or Early Ketland or Davis Early English or Early Colonial locks.
|
|
|
|
|
| |
SP-200-GS - German silver sideplateThis side plate was copied from an original English styled musket that was made in America. Measures 5-3/4 long x 1 1/4 tall. Hole spacing is about 3 3/8". It can be moved a little longer or shorter since the holes are not drilled yet. Will fit larger locks like the Chambers Round faced English or Early Ketland or Davis Early English or Early Colonial locks.
|
|
|
|
|
| |
SP-200-I - Steel SideplateThis side plate was copied from an original English styled musket that was made in America. Measures 5-3/4 long x 1 1/4 tall. Hole spacing is about 3 3/8". It can be moved a little longer or shorter since the holes are not drilled yet. Will fit larger locks like the Chambers Round faced English or Early Ketland or Davis Early English or Early Colonial locks.
|
|
|
|
|
|  |
SP-250-B - Frederick County, Maryland sideplate in brassCopied from a rifle signed Wickham & Matthews, Frederick County, Maryland. Overall length is 4 11/16 and the height is 11/16, thickness is 1/16" to be inlet flush with the wood. Not engraved. Designed for hole spacing of 2 7/16", to fit small Siler.
|
|
|
|
|
|  |
SP-250-GS - Frederick County, Maryland sideplate in German silverCopied from a rifle signed Wickham & Matthews, Frederick County, Maryland. Overall length is 4 11/16 and the height is 11/16, thickness is 1/16" to be inlet flush with the wood. Not engraved. Designed for hole spacing of 2 7/16", to fit small Siler.
|
|
|
|
|
SP-348-B Brass sideplateSmall French style sideplate to fit locks like the little Becky and other in that size range. Bolt hole spacing is 2 1/8". Overall length is 3 15/16" and height is 3/4".
|
|
|
|
|
