Shopping Categories:


Look For Gifts
under this Price:
$


Company Info:



Visit us on Facebook

SSL Certificate
SSL Certificate


Found 147 items, showing 1 to 25.    Next 25 Matches
22800 - 1/16” Diameter Pin Punch  - Tools

22800 - 1/16” Diameter Pin Punch

This is the pin punch I use for pushing through our 1/16” diameter pin stock used in the fore stock. A useful tip for you is to round the ends of your pins slightly so that they will ease through the existing hole and not cut through, or punch out chunks of wood on the opposite side. Also, slot your underlugs from front to back, not up and down, to allow the barrel to move when stock and barrel expand and contract due to temperature and recoil.

$8.50 View Cart Check Out
23300 - 4” Jewelers Saw Frame - Tools

23300 - 4” Jewelers Saw Frame

This saw frame is provided us by either Swiss Grobet or made by Germany to their typical tough quality control. It is strongly constructed with flat rigid steel frames, hardwood handle and thumbscrew locking vises which allow you a full range of adjustments. Remember that you can sometimes re-use a blade if a break occurs closer to one end. Breaks usually occur from impatience getting the blade too hot! I encourage you to use Swiss made blades. They are by far the toughest and last the longest of any others.

$22.50 View Cart Check Out
23310 - Jewelers Saw Blade #3 - Tools

23310 - Jewelers Saw Blade #3

Swiss saw blades .011 Thick, .018” wide – Size #3 extra fine, package of 12.

$4.00 View Cart Check Out
23320 - Jewelers Saw Blade #2  - Tools

23320 - Jewelers Saw Blade #2

Swiss saw blades .016 Thick, .025” wide – Size #2 fine, package of 12.

$4.00 View Cart Check Out
23325 - Jewelers Saw Blade #5 - Tools

23325 - Jewelers Saw Blade #5

Swiss saw blades - Size #5 coarse, package of 12.

$5.00 View Cart Check Out
25550 - 1/8” Wide – Straight Inletting Chisel  - Tools

25550 - 1/8” Wide – Straight Inletting Chisel

Made right here in our own shop from tool steel and then heat treated for a durable life in two styles. 6-1/2” long in both bent/offset and standard straight shapes, these chisels are available in four blade sizes per style. Will need a final stoning when you receive them to be razor-sharp.

$12.00 View Cart Check Out
25560 - 3/16”Wide – Straight Inletting Chisel  - Tools

25560 - 3/16”Wide – Straight Inletting Chisel

3/16" wide inletting chisel

$12.00 View Cart Check Out
25570 - 1/4” Wide – Straight Inletting Chisel - Tools

25570 - 1/4” Wide – Straight Inletting Chisel

$12.00 View Cart Check Out
25580 - 3/8” Wide – Straight Inletting Chisel  - Tools

25580 - 3/8” Wide – Straight Inletting Chisel

$12.00 View Cart Check Out
25585 - 1/4 bent scraper with handle  - Tools

25585 - 1/4 bent scraper with handle

25585-1/4" bent scraper with handle.

$16.00 View Cart Check Out
25586 - 3/8” Bent, Flat Scraper  - Tools

25586 - 3/8” Bent, Flat Scraper

25586- 3/8" bent scraper with handle.

$16.00 View Cart Check Out
25590 - 1/8” Wide– Bent Offset Inletting Chisel  - Tools

25590 - 1/8” Wide– Bent Offset Inletting Chisel

$12.00 View Cart Check Out
25600 - 3/16”Wide–Bent Offset Inletting Chisel  - Tools

25600 - 3/16”Wide–Bent Offset Inletting Chisel

3/16”Wide–Bent Offset Inletting Chisel.

$12.00 View Cart Check Out
25610 - 1/4” Wide– Bent Offset Inletting Chisel  - Tools

25610 - 1/4” Wide– Bent Offset Inletting Chisel

$12.00 View Cart Check Out
25620 - 3/8” Wide– Bent Offset Inletting Chisel  - Tools

25620 - 3/8” Wide– Bent Offset Inletting Chisel

3/8” Wide – Bent Offset Inletting Chisel.

$12.00 View Cart Check Out
32305 - Rawhide Mallet  - Tools

32305 - Rawhide Mallet

4 oz. rawhide mallet with 1 1/4" diameter face. Ideal for driving wood chisels or metal gravers.

$22.25 View Cart Check Out
32330B - Nipple Pick/ Vent Pick Brass *** OUT OF STOCK *** - Tools

32330B - Nipple Pick/ Vent Pick Brass *** OUT OF STOCK ***

Our new updated design to an old idea has given this useful tool a touch of class. The pick is encased in the brass (or steel) tube to protect both you, and it, while being carried in your pouch. The flat bottom on the case can be used to nap your flint. The pick is made of spring wire. *** Temporarily OUT OF STOCK ***

$8.25 View Cart Check Out
32330I - Nipple Pick/ Vent Pick Steel *** OUT OF STOCK *** - Tools

32330I - Nipple Pick/ Vent Pick Steel *** OUT OF STOCK ***

Our new updated design to an old idea has given this useful tool a touch of class. The pick is encased in the brass (or steel) tube to protect both you, and it, while being carried in your pouch. The flat bottom on the case can be used to nap your flint. The pick is made of spring wire. *** OUT OF STOCK ***

$8.25 View Cart Check Out
32340 - Solid Brass Knapping Hammer  - Tools

32340 - Solid Brass Knapping Hammer

Solid Brass Knapping Hammer. 3 5/8" long X 1 5/8" wide.

$7.50 View Cart Check Out
60005 - 6 Piece 7” File Set  - Tools

60005 - 6 Piece 7” File Set

For the folks who need a set of recommended general purpose files. I use these regularly for detailing work on both wood and metal. This set has six different files common to a builders needs: half round, triangular, flat, round, square and warding. It is not all you need, but is an assortment of the most critical small files at a very good price for a quality made set.

$20.00 View Cart Check Out
60015 - Riffler 10 Piece File Set - Tools

60015 - Riffler 10 Piece File Set

Finally! Here is a quality made riffler 10 piece file set you should find on many a builders bench. Most work in building rifles is file work, so learn to like it by taking pleasure in the amount of detail which can be created and added to an otherwise plain part. The secret is always in the files! I am convinced that a selection of the correct “cut” files is a gift from above.

$16.00 View Cart Check Out
60021 - File card (brush) - Tools

60021 - File card (brush)

File card (file brush. This is used to clean the metal filings out of file teeth-very important in extending the life of your files.

$7.50 View Cart Check Out
60030 - Wire Looping Pliers  - Tools

60030 - Wire Looping Pliers

Looping pliers

$15.00 View Cart Check Out
60035 - Wire Flush-Cutting Pliers  - Tools

60035 - Wire Flush-Cutting Pliers

Good starts and finishes can only be achieved with a sharp perfect cut. These pliers cut flush at the end of your run without the chisel end so common to regular side cutters. A fine point lets you cut perfectly to end the run. This latest batch is made in Taiwan but cut very cleanly.

$16.00 View Cart Check Out
BG-B Bore gauge - brass - Tools

BG-B Bore gauge - brass

Clearly stamped on one side with caliber, the other side stamped with bore gauges.

$3.00 View Cart Check Out
Found 147 items, showing 1 to 25.    Next 25 Matches

Muzzleloader Builder's Supply, P.O. Box 848, Aberdeen, ID 83210
Business Hours: Mon-Fri 9am-5pm
Email: mbssales@hotmail.com - Toll Free: 877 397-3008 - Fax: 208 397-3009
We will no longer ship any orders outside of the United States.
Copyright 2012-2020 by Muzzleloader Builder's Supply. All rights reserved.