| |
14840 - R.E. Davis York Single Pull Trigger–Mod 005Appropriate for most 18th and early 19th century style longrifles and fowlers. Bar can be modified for most any application including pistols. Has 5/16” wide pigtail trigger and simple scroll design behind the pad. Design is quite well done; bar measures 4-1/8” x 7/16” and tapered.
|
|
|
| |
14843 - Davis Small Bar Single Pull Trigger # 0402 Appropriate for most 18th and early 19th century style pistols and early rifles. Has 5/16” wide pigtail trigger and simple scroll design behind the pad. Very short, tapered bar measures 2-5/8” x 7/16” wide tapering down to 5/16. Will fit most any pistol application
|
|
|
| |
14845 - R.E. Davis York Single Pull Pistol Trigger #287 Appropriate for most 18th and early 19th century Kentucky style or holster pistols. Has 5/16” wide pigtail trigger and simple scroll design behind the pad. Measures 4-1/8” x 7/16” with tapered bar and arch to fit most profiles. Can easily be bent or cut to fit your own pistol installation.
|
|
|
| |
14846 - Bivins Single Pull Trigger - Model 0210 A well-designed pigtail trigger mounted with higher pin placement for good pull-off leverage. Made to fit 18th and 19th century rifles and fowlers. Trigger extends 7/8” below the plate. Shaped bar/plate measures 7/16 at widest point and is 3-3/4” long.
|
|
|
| |
14850 - R.E. Davis Single Pull Scroll Trigger–Model 007 This single trigger has a wide pigtail trigger and cast scroll design behind the pad. The pin placement is high for good mechanical leverage. Plate measures 3” x 7/16” non-tapered bar.
|
|
|
| |
14860 - Double Set Single Lever Trigger Model 001 Single lever means that only the rear set trigger engages the lock sear, and must be set in order to fire the gun. The plate measures 5-3/16” x 3/8” wide. Trigger spacing is 1 1/8", trigger depth is 7/8".
|
|
|
| |
14870 - Small Davis Double Set Triggers 0004Davis small double set triggers, Model 0004, features smaller, finer triggers for ease of fit into most any style rifle and guard. Technical: triggers extend max 15/16” below plate, bar measures 5-1/4 x approximately .400” width. Spacing across triggers at full set 1-5/16” front to back.
|
|
|
| |
14880 - Large Davis Double Set Triggers-Model 0006 Known as the Large Davis double set triggers, Model No. 0006, these have the curled front trigger typical to Tennessee rifles. Technical: triggers extend 1 inch below plate, bar measures 5-5/8 long and 3/8 wide. Spacing across triggers at full set 1-3/8 inch front to back.
|
|
|
| |
14890 - R.E. Davis Hawken Double Set Triggers #009An accurate, first rate quality reproduction of an original Hawken trigger. The bar has a ground finish while the triggers themselves are polished hardened steel. The pull-off is completely adjustable just as on the original. Plate measures 10-1/4” long x 1/2” wide.
|
|
|
| |
14895 - R.E. Davis Golden Age Double Set TriggerA large Kentucky rifle style as may be seen on the Crockett longrifle or many other Golden Age rifles of the period. Built on the large Davis #006 frame, a redesigned rear trigger makes this new trigger an attractive, quality made trigger reminiscent of the past.
|
|
|
| |
14896 - Small Kentucky Double Set Trigger Model 1019 Slant back This latest addition to the Davis trigger line is a major success. This trigger is built on the No. 004 small frame. It a 004 with the layed back rear trigger. We call this Davis' 'slant back' trigger.
|
|
|
| |
14900 - R.E. Davis Jaeger Double Set Trigger-Model 008 This large trigger has the slant back style typical of the Germanic Jaeger style rifles of the era up to and including the Revolutionary War. Technical: Spacing across triggers at full set is 2-1/16” and front trigger extends 1” below the plate. Bar length 5-5/8 x 3/8” wide.
|
|
|
| |
19870 - L&R SingleTrigger - Short Plate Model T-1500These triggers are available for both rifle with the long bar and pistol, the short bar. Mainly for Leman and other trade guns, Southern and shotguns. They are a fairly long slim trigger with high knife and pin locations. Long bar measures 4-3/4” long, short bar is 2-3/4” long, both plates are 7/16” wide and have rounded ends.
|
|
|
| |
19880 - L&R SingleTrigger - Long PlateModel T-1600These triggers are available for both rifle with the long bar and pistol, the short bar. Mainly for Leman and other trade guns, Southern and shotguns. They are a fairly long slim trigger with high knife and pin locations. Long bar measures 4-3/4” long, short bar is 2-3/4” long, both plates are 7/16” wide and have rounded ends.
|
|
|
| |
25040 - L&R Hawken Double Set –Curved Front Trigger T-1400 L&R Hawken triggers are offered with both a straight front trigger style #25050 or a curved front trigger style #25040. Each is a double set trigger and can be shot set or unset. Bar has a ground finish while the triggers themselves are as cast black steel with good height for thick stocks that can be filed to your own application. The pull-off is completely adjustable. Plate measures 9-3/4” long x 1/2” wide. These two choices are good quality Hawken triggers.
|
|
|
| |
25050 - L&R Hawken Double Set –Straight Front Trigger T-1300 L&R Hawken triggers are offered with both a straight front trigger style #25050 or a curved front trigger style #25040. Each is a double set trigger and can be shot set or unset. Bar has a ground finish while the triggers themselves are as cast black steel with good height for thick stocks that can be filed to your own application. The pull-off is completely adjustable. Plate measures 9-3/4” long x 1/2” wide. These two choices are good quality Hawken triggers.
|
|
|
| |
34190 - European Style Single Trigger A complete pistol trigger copied from an original French Dragoon. The plate is lugged to make for a more durable installation but has an authentic appearance.
|
|
|
| |
34325 - English Dragoon Single TriggerSingle trigger for English Dragoons of the early 1700’s. This is a copy of the originals but made with lugged plate to make the trigger more durable as one unit. Complete & assembled English Single Trigger
|
|
|
| |
34525 - English Georgian Single TriggerSet of one English Georgian trigger bar and one matching knife copied from an original example circa 1690-1700
|
|
|
| |
34615 - Danish Single TriggerA copy of our original Danish single trigger. Features fat pad style trigger knife as on our gentlemen pistols but on a lugged bar for a durable installation.
|
|
|
| |
34720 - Pietro Martinoni Single TriggerAn Italian single trigger style of plate and knife in tiny form for the Martinoni Pocket Pistol dated 1700. The tiny fancy blade was pinned in the wood and the plate captured by the tang screw and triggerguard. A fat padded trigger makes the side touch a more reasonable access thru the guard. Italian Trigger Plate & Trigger Blade. (Assembled of trigger knife #34721 and trigger plate #34722.
|
|
|
| |
DST-BED - L&R Bedford style double set triggerL & R Bedford style double set trigger with shorter, slightly curved triggers on a 3/8" wide X 5 5/8" long curved bar (more curved than other L&R trigger bars). Triggers are made to fit in a shallow bow, with a trigger height of just 3/4". Replacement triggers available (already hardened), front trigger only = #29504, rear trigger only - #29514.
|
|
|
| |
DST-T5 - L&R small double set trigger L & R small double set trigger with straight front trigger.
|
|
|
| |
DST-T7 - L&R large double set triggerL & R large double set trigger with recurved front trigger.
|
|
|
|
DST-T9 - L&R Golden Age double set triggerL & R Golden Age double set trigger.
|
|
|
|