18600 - Brass Rifle Capper by Ted Cash Mfg. Co.

The finest manufacturer of cappers in America is Ted Cash Manufacturing. This capper is the number one most popular due to the quality. Holds approximately 75 each of number 11 size percussion caps. * Matte finish Brass *

18620 - Brass Universal Capper by Ted Cash Mfg. Co.

The finest manufacturer of cappers in America is Ted Cash Manufacturing. This capper is popular due to the extended narrow nose making it easier to get into some of restricted area on some of the bolster type breech plugs and incline's. Holds number 11 size percussion caps. * Brass *

18640 - Flintlock Pan Primer

This is the most dependable flintlock pan primer made on the market today. It will deposit the exact same measure of 3 grains each time you fill the pan. Made of brass with stainless spring. Body is 1/2" in diameter, and 2 1/2" in length, with an overall length of 3 7/8". Just the right size!

18650 - Priming Horn Valve 3 grain

A three grain valve you install into your own horn for making a flintlock pan primer. Knurled end holds epoxy inside your drilled hole. Valve unscrews for maintenance.

18660 - 120 grain Adjustable Powder Measure with spout

This adjustable powder measure is the same measure as #18670, with a side swing spout mounted which swivels out of the way for filling. (With spout).

18670 - 120 grain Adjustable Powder Measure

This is a top quality basic adjustable measure made in brass. It has graduations from 0 to 120 grains in 5 grain increments. (No Spout).

18690 - Bushing for Valve or Acorns

Bushing is standard, and can be used in the horn's larger diameter plug end for our acorns, as well as to fill through.

18700 - 20 Grain flask spout

18703 - 35 grain non-adjustable powder measure

35 grain non-adjustable powder measure

18710 - 40 Grain flask spout

18716 - 50 grain non-adjustable powder measure

18717 - 60 grain non-adjustable powder measure

18718 - 70 grain non-adjustable powder measure

18723 - 80 grain non-adjustable powder measure

18730 - 90 Grain flask spout

25860 - Horn Plug with Bushing – Small Size

Made from solid brass, these plugs install into the large end of the horn for making filling easier and provide a good groove for your strap to hold to. (7/16").

25870 - Horn Plug with Bushing – Larger Size

Made from solid pure brass, these plugs install into the large end of the horn for making filling easier and provide a good groove for your strap to hold to. (5/8").

25880 - Horn Spout & Plug Set

Mount in your horn for a quality waterproof seal! Knurled end for epoxy and plug has “O” ring to seal your powder securely within. (1/2").

32500 - Brass In Line design Capper for No. 11 Caps

Solid metal body constructed of brass with first rate quality metal assembly held to superb tolerances. This all means you get the performance you demand!

32520 - 30 Grain flask spout

32530 - 70 Grain flask spout

32540 - 80 Grain flask spout

32690 - Small Brass Acorn and bushing

Small brass acorn with bushing. Allows you to fill through the bushing and have a groove for your strap. The base of the acorn hides the bushing. Machined from yellow brass. Outside diameter of barb is .437" (7/16"), diameter of acorn base is .56", and the acorn shape that sticks out of the horn is .90" tall.

PHV-SET - Powder Horn Valve Set

This is a set including the powder horn valve, bushing to glue into your horn and the spout to fit into the valve. Made in the USA of brass.