|
|  |
19630 - 8-32 DOMED HEAD 3/8 DIA Lock Screw in domed head style as pictured, center two. 2" long.
|
|
|
|
|
|  |
19635 - 8-32 DOMED HEAD 1/2 DIA Early Style 1/2 inch diameter Domed Head Lock Screw as pictured, center two.
|
|
|
|
|
|  |
19640 - 10-32 DOMED HEAD 3/8 DIA Lock Screw in domed head style as pictured, center two.
|
|
|
|
|
| |
19645 - 10-32 DOMED HEAD 1/2 DIA *** OUT OF STOCK ***Early Style 1/2 inch diameter Domed Head Lock Screw as pictured, center two. Shank length (without head) is 2" long. Threaded portion is 1" long. *** OUT OF STOCK ***
|
|
|
|
|
|  |
19650 - Domed head lock bolt 5/16 head 8-32 5/16" diameter domed head lock bolt. 8-32 thread. Length is 2" long with approximately 1" of thread.
|
|
|
|
|
|  |
20990 - Sling Swivel drilled Narrow Front Swivel for installing on forestock through lug on the trigger guard, drilled, with bolt included.
|
|
|
|
|
|  |
24541 Sling swivel - wide Front sling swivel - wide - drilled, with bolt included. Inside is 1 1/32" wide.
|
|
|
|
|
|  |
24551 - sling swivel - narrowSling swivel - narrow - drilled, with bolt included.
|
|
|
|
|
|  |
25450 - .045 x 5/16 G.S. nails- 10 pack.045 X 5/16 long German Silver nails / tacks. 10 ea. per package. ** (Use #55 or #56 drill bit for these).
|
|
|
|
|
| |
25450-10 - G.S. nails- 100 per pack.045 X 5/16 long German Silver nails / tacks. 100 per package.(Use #55 or #56 drill bit for these).
|
|
|
|
|
|  |
25452 - .040 x 5/16 brass nails- 10 pack.040 X 5/16 long Brass tacks. 10 ea. per package. These have a taper on the bottom of the head to match a chamfered hole. For nailing in inlays or putting small dots at the end of your wire inlay decorations.
|
|
|
|
|
|  |
25455 - 1/16” dia x 1/2 brass nailsBrass tacks / nails .062 X 1/2" long, Pictured far right. 12 pack
|
|
|
|
|
| |
25456 Brass nails .049 X 1/2 pkg of 12Brass nails / tacks .049 diameter X 1/2" long, 12 pack. Pictured third, left to right. Package of 12.
|
|
|
|
|
|  |
BUTTON-2-B- Sling button 3/4 smooth dome head in brass 3/4" diameter smooth dome head sling button in brass
|
|
|
|
|
|  |
BUTTON-2-I- Sling Button 3/4 smooth dome head - steel 3/4" diameter smooth dome head sling button in steel
|
|
|
|
|
|  |
Button-1-B Brass sling buttonSling button with 5/8" head and rim. Brass.
|
|
|
|
|
| |
Button-1-I steel sling button 5/8Sling swivel button with 5/8" head and rim. Steel.
|
|
|
|
|
|  |
STUD-1 - Sling swivel stud - steelSteel sling swivel stud. Threaded part is #12 wood screw X 3/4" long. Will require a 5/32" pilot hole. Will work with our narrow sling swivel # 24551.
|
|
|
|
|
|  |
SWIVEL-N Sling swivel- narrow for 1 1/2 slingRear sling swivel - narrow - drilled, with bolt included. Inside where bolt is 1 9/16" wide. This swivel is made for a sling that is 1 1/2" wide. The screw is only threaded enough for the existing width. If you want to squeeze it down a little narrower, you will need to lengthen the threads on the screw with a 6-40 die. THIS SWIVEL WILL NOT FIT A STUD. IT IS MADE TO GO THROUGH THE FRONT OF A TRIGGER GUARD!!!
|
|
|
|
|
|  |
SWIVEL-W Sling swivel - wide 1 1/2 slingFront sling swivel - wide - drilled, with bolt included. Inside where bolt is 1 1/32" wide. This swivel is made for a sling that is 1 1/2" wide. The screw is only threaded enough for the existing width. If you want to squeeze it down a little narrower, you will need to lengthen the threads on the screw with a 6-40 die.
|
|
|
|
|
TS-10-32 - 10-32 TANG SCREW 3/8 HEAD Tang Screw 3/8" head 10-32 in oval head style. This are old stock for Browning Mountain rifle.***Length is 1.550 and the treaded portion is approximately .500 long.*** These are shorter than our normal tang screws but should work for many of your projects.***
|
|
|
|
|
