|
|  |
34795 - Martinoni G.S. wrist inlayMartinoni pistol German silver wrist inlay.
|
|
|
|
|
|  |
IN-B-100 - Brass forearm inlayTiny: 1" long X 5/16" wide.
|
|
|
|
|
|  |
IN-FRD1-B Freund Jaeger rifle cheekpiece inlay in brass From the Ron Scott collection. Investment cast in brass, a cheekpiece inlay from a Freund Jaeger rifle. Nicely chiseled, clean and crisp. Dimensions: 3 1/4" long X 1 7/8" tall. It will have four piercings when cleaned up. This goes on the cheekpiece surface, and #IN-FRD2-B goes on the lower flat edge of the cheekpiece itself.
|
|
|
|
|
|  |
IN-FRD2-B Freund Jaeger rifle lower cheekpiece inlay in brassFrom the Ron Scott collection. Investment cast in brass (only), a lower cheekpiece inlay from a Freund Jaeger rifle. Beautifully engraved, clean and crisp. Dimensions: 3 13/16" long X 9/16" tall. This goes on the lower flat edge of the cheekpiece itself. and #IN-FRD2-B goes on the cheekpiece surface above this inlay.
|
|
|
|
|
| |
IN-GS-100 - German silver forearm inlayTiny: 1" long X 5/16" wide.
|
|
|
|
|
|  |
IN-GS-105 - Double headed eagle German silverSmall: 1 3/16" tall X 1 9/16" wide.
|
|
|
|
|
|  |
IN-GS-110 - Goddess of Liberty inlay German Silver This 'Goddess of Liberty' inlay is very specific to Lehigh area guns. It was usually inlet just forward of the triggerguard. Sometimes called 'the Liberty head' or 'the Indian head'. A very appropriate inlay for our Rupp guns and other Lehigh style guns. It is said that the name comes from when the freed Romans wore the Phyrgian cap or pileus as a symbol of their newfound freedom, and the tradition was carried on by the Sons of Liberty in 1765.
|
|
|
|
|
|  |
IN-HS4-B - Large brass star can be fit inside of oval ring Large brass star that can be used alone, or fit inside of our oval rings #IN-RO-B or IN-RO-GS. Dimensions: 2 1/8" X 1 1/8".
|
|
|
|
|
|  |
IN-HS4-GS - Large German silver star can be fit inside of oval ring Large German silver star that can be used alone, or fit inside of our oval rings #IN-RO-GS or IN-RO-B. Dimensions: 2 1/8" X 1 1/8".
|
|
|
|
|
|  |
IN-OCP-B Oval inlay in brassOval inlay in brass. 2 1/8" long, 1 1/8" high.
|
|
|
|
|
|  |
IN-OCP-GS oval inlay in German silverOval inlay in German silver. 2 1/8" long, 1 1/8" high.
|
|
|
|
|
|  |
IN-RO-B Large brass oval that can surround starLarge brass oval can be used alone, or with one of our stars #IN-HS4-B or IN-HS4-GS inside of it. Outside dimensions: 2 7/16" X 1 7/16". Inside dimensions: 2 1/8" X 1 1/8". (5/16" wall).
|
|
|
|
|
|  |
IN-RO-GS Large German silver oval that can surround starLarge German silver oval can be used alone, or with one of our stars #IN-HS4-B or IN-HS4-GS inside of it. Outside dimensions: 2 7/16" X 1 7/16". Inside dimensions: 2 1/8" X 1 1/8". (5/16" wall).
|
|
|
|
|
|  |
IN-ROBDEMO - photo only for demonstrationPhoto only of #IN-HS4-B inside of IN-RO-B. You can also use an oval of brass and a star of German silver, or vice versa.
|
|
|
|
|
|  |
IN-ROGDEMO - photo only for demonstrationPhoto only of #IN-HS4-GS inside of IN-RO-GS. You can also use an oval of brass and a star of German silver, or vice versa.
|
|
|
|
|
|  |
IN-VOG-B North Carolina style cheekpiece in brassNorth Carolina style cheekpiece similar to the one used by the Vogler family on their Virginia guns, as well as being used by other makers in the 1700's. 3" long and 1 1/8" wide, in brass.
|
|
|
|
|
|  |
IN-VOG-GS North Carolina cheekpiece in German silverNorth Carolina style cheekpiece similar to the one used by the Vogler family on their Virginia guns, as well as being used by other makers in the 1700's. 3" long and 1 1/8" wide, in German silver.
|
|
|
|
|
|  |
IN-WPF-B - Brass Hawken style oval forearm wedge plate inlay Brass Hawken style oval forearm wedge plate inlay. Dimensions: 1 1/8" long X 9/16" wide". Slot is 3/8" long.
|
|
|
|
|
|  |
IN-WPF-GS - German silver Hawken style oval forearm wedge plate inlayGerman silver Hawken style oval forearm wedge plate inlay. Dimensions: 1 1/8" long X 9/16" wide". Slot is 3/8" long.
|
|
|
|
|
|  |
IN-WPF-I - Steel Hawken style oval forearm wedge plate inlaySteel Hawken style oval forearm wedge plate inlay. Dimensions: 1 1/8" long X 9/16" wide". Slot is 3/8" long.
|
|
|
|
|
|  |
PBD-CA-GS Carlsbad patchbox door cover in German silverFrom the Ron Scott collection. Investment cast in German silver, from a Carlsbad region Jaeger rifle, to be put on so that it completely covers a wooden patchbox door. Fully chiseled with a stag hunting scene. Dimensions are 1 1/8" wide at the front X 1 1/4" wide at the rear, with an overall length of 5 3/4".
|
|
|
|
|
|  |
PBE-700-B Patchbox door ends - brassFrom the Ron Scott collection. Investment cast in brass, two inlays from a Jaeger rifle, to be put on each end of a wooden patchbox door. Nicely chiseled. The hole in the forward inlay is for a patchbox release button. Dimensions of the forward end inlay: 2 15/16" long X 1 1/16" wide. Rear end inlay dimensions 2 1/2" long X 1 1/4" wide. To find all of the items that we offer on this style, type in the number '700' into the white search box, click on send, then click on 'display' to see each item. There is a buttplate, two patch box ends sold as a set, triggerguard, thumbpiece, sideplate and a lower and two upper thimbles sold as a set. Available in either brass, German silver and steel.
|
|
|
|
|
| |
PBE-700-GS Patchbox door ends - German silverFrom the Ron Scott collection. Investment cast in German silver, two inlays from a Jaeger rifle, to be put on each end of a wooden patchbox door. Nicely chiseled. The hole in the forward inlay is for a patchbox release button. Dimensions of the forward end inlay: 2 15/16" long X 1 1/16" wide. Rear end inlay dimensions 2 1/2" long X 1 1/4" wide. To find all of the items that we offer on this style, type in the number '700' into the white search box, click on send, then click on 'display' to see each item. There is a buttplate, two patch box ends sold as a set, triggerguard, thumbpiece, sideplate and a lower and two upper thimbles sold as a set. Available in either brass, German silver and steel.
|
|
|
|
|
| |
PBE-700-I Patchbox door ends - steelFrom the Ron Scott collection. Investment cast in steel, two inlays from a Jaeger rifle, to be put on each end of a wooden patchbox door. Nicely chiseled. The hole in the forward inlay is for a patchbox release button. Dimensions of the forward end inlay: 2 15/16" long X 1 1/16" wide. Rear end inlay dimensions 2 1/2" long X 1 1/4" wide. To find all of the items that we offer on this style, type in the number '700' into the white search box, click on send, then click on 'display' to see each item. There is a buttplate, two patch box ends sold as a set, triggerguard, thumbpiece, sideplate and a lower and two upper thimbles sold as a set. Available in either brass, German silver and steel.
|
|
|
|
|
PBE-FRD-FB Patchbox door front end in brass From the Ron Scott collection. Investment cast in brass, an inlay from a Freund Jaeger rifle, to be put on the front end of a wooden patchbox door. Nicely chiseled. Dimensions of the forward end inlay: 2 5/8" long X 1 1/4" wide. (Rear piece is no longer available).
|
|
|
|
|
