Golden Age Lancaster

Golden Age Lancaster Stock Photo

This stock is the typical period Lancaster of the 1790-1810 and represents the lines which carried through the entire muzzleloading era. From the first “early” styles  in  the  mid 1700’s until the entry of  the caplock   guns  of  the mid 1800’s, the characteristics of the original Kentucky rifle, which originated in Lancaster, PA, endured, expanded and underwent stylistic change. As frontiersman explored East and South opening up new roads of travel connecting the Carolinas with Pennsylvania, gunsmiths were increasingly needed to repair, rebuild or create new rifles. This demand caused the smiths to move from one established school where they usually apprenticed, to another area to settle anew into their own trade. This freedom allowed change. Later guns began to be ornate in decoration as well as thinner & finer. This style Lancaster pre-shaped stock has a 1-11/16” wide butt in the sanded rough.  It retains the original lines of the early style of Lancaster stock but uses a slightly thinner buttplate slimming the rifle into a beautiful long and trim rifle which still sets well into the shoulder. The buttplate  provides a good wide 1-5/8” thickness to spread recoil from your shot. Right hand.

 

 

 

 

 

 

MOUNTINGS
14120  Buttplate (Brass)
14570  Triggerguard (Brass)
13610  Rear Thimble (Brass)
13670
  Upper Thimbles (Brass)
21160  Sideplate (Brass)
12860  Nosecap (Brass - 7/8 ")
21120  Toeplate (Brass)
10200  Patchbox (Brass)
16500  Front Sight (Silver Blade)
16540  Rear Sight (Early Low)
11600  Top Wrist Inlay (German Silver)
11780  Cheek Inlay (German Silver)
12040  Forestodck Inlay (German Silver)

STANDARD SPECIFICATIONS
Straight Octagon barrels..........7/8", 15/16" or 1”
Drilled ramrod hole ......................3/8” or 7/16"
Butt width x height…….........1-11/16” x 5-1/4”
Lock area ………….…...........1-3/4” x 6-1/2 ”
Width across the lock face …...................1-3/4”
Drop at the heel ……………..................3-1/2”
Trigger Pulls up to 15”   

PRE-SHAPED STOCK
30980      P++ Grade Curly Maple
30990
      SP Grade Curly Maple
30995     SP+ Grade Curly Maple
31000     Cherry
30820      Inlet Lock (for Siler only)
30830      Inlet Trigger

 

 

 

 

 

 

 

 

 

STANDARD  FITTINGS & PARTS
14920      Polished Siler Flintlock
14870      Small Davis Double-Set Trigger
19380      .50 x 7/8 " x 42 " Green Mountain Barrel
16080      Flared tang Breech Plug 5/8-18
21180      1/4-28 Stainless Steel Slotted Touchhole Liner
19630      2 ea, Oval Head 8-32 Lock Screws
16450      1 ea, Tang Screw 8-32
27600      3 ea. Underlugs for Pins
16380      1 Pkg of 12 Oval Head #3 Wood Screws
16390      1 Pkg of 12 Oval Head #5 Wood Screws
16400      1 Pkg of 12 Oval Head #8 Wood Screws
24630      1 Pkg of 6 Pieces Pin Stock 1/16" o.d.
25450      1 Pkg German Silver Nails for Inlays
16795      3/8" Ram Rod w/ 8-32 Brass Tip
17250      Cleaning Jag, .50 Cal. 8-32s