Fine Danish Gentleman's Pistol
From an original Danish pistol from the 1700 era.
The lock was first a Germanic round-faced style,
then later ground flat when modified to percussion in the mid 1800's.
A small Siler is only available in right hand but has the approximate shape closest to the originals.
All the mountings are being offered in steel, brass and German silver.
Stock is provided shaped and inlet for our 7-1/2" octagon to round barrel, and with ramrod hole & channel.
This stock & mountings has been produced from my own original pistol for your assurance of the finest possible reproduction quality of all
appropriate architectural lines in this Danish style.
To order a complete kit, choose the barrel, then select the metal you wish your mountings
(buttplate, triggerguard & thimbles) to be in.
Kits will include all parts to build one pistol; stains and finishes not included.
To order individual parts, see the parts list and select the parts you need.
|Barrel Channel Length||…||7-1/2"|
|Lock Area||…||1-3/16” x 5”|
|Width across Lock Face||…||1-3/8"|
The Kit and Barrel
Don't forget to order a barrel!
||45 cal Rifled x 7-1/2" Octagon to Round w/ Wedding Band Swamped with Plug
||.50 cal Rifled x 7-1/2" Octagon to Round w/ Wedding Band Swamped with Plug
||50 cal Smoothbore x 7-1/2" Oct to Round w/ Wedding Band with Plug
Pre-shaped Stock with Straight Barrel & Ramrod Channel
||SP+ Grade Curly Maple
||Brass Small Danish Triggerguard
||Brass Small Danish Buttcap
||Brass Small Danish Thimble Set
||Brass Small Danish Sideplate
||Brass Small Danish Wrist Inlay
||Steel Small Danish Triggerguard
||Steel Small Danish Buttcap
||Steel Small Danish Thimble Set
||Steel Small Danish Sideplate
||German Silver Small Danish Triggerguard
||German Silver Small Danish Buttcap
||German Silver Small Danish Thimble Set
||German Silver Small Danish Sideplate
||German Silver Small Danish Wrist Inlay
Fittings & Parts
||Small Siler Flintlock
||Danish Single Trigger
||2 ea. 6-32 x 3/8 Oval Head Lock Screws
||1 ea, Tang Screw 8-32
||2 ea. 1/2" Underlug Concave Base
||1 ea. 1/2" Flat Base Underlug for Pin
||Complete tapered and tipped ramrod
||1 Pkg of 12 Oval Head #5 Wood Screws
||1 Pkg of 6 Pieces Pin Stock 1/16”o.d.
Top of Page
Muzzleloader Builder's Supply, P.O. Box 848, Aberdeen, ID 83210
Business Hours: Mon-Fri 9am-5pm
Email: email@example.com - Toll Free: 877 397-3008 - Fax: 208 397-3009
© Copyright by www.MuzzleloaderBuildersSupply.com, 2011-2015. All rights Reserved.
All Photos and Text are the property of Muzzleloader Builder's Supply
and may NOT be copied in whole or in part without the expressed,
of Muzzleloader Builder's Supply