|
|  |
BP-535-I- Jacob Dickert - SteelA style by Jacob Dickert of Lancaster School who was one, if not the leading Master Smith of our American Longrifle during its development. H= 4 7/8” Overall W= 1-7/8” CL= 2” Superb casting!
|
|
|
|
|
|  |
BP-700-B - Chiseled Jaeger buttplate - brassBrass casting from the Ron Scott collection. This casting was made from a nicely chiseled Jaeger. It is beautifully chiseled on the comb. H = 4 15/16", W = 2 1/8", " CL = 4 5/8". The dovetail cut in the buttplate has been filled, so you have the option of not using a sliding wooden patchbox.
|
|
|
|
|
| |
BP-700-GS - Chiseled Jaeger buttplate - German silverGerman silver casting from the Ron Scott collection. This casting was made from a nicely chiseled Jaeger. It is beautifully chiseled on the comb. H = 4 15/16", W = 2 1/8", " CL = 4 5/8". The dovetail cut in the buttplate has been filled, so you have the option of not using a sliding wooden patchbox.
|
|
|
|
|
| |
BP-700-I - Chiseled Jaeger buttplate - steel *** OUT OF STOCK *** Steel casting from the Ron Scott collection. This casting was made from a nicely chiseled Jaeger. It is beautifully chiseled on the comb. H = 4 15/16", W = 2 1/8", " CL = 4 5/8". The dovetail cut in the buttplate has been filled, so you have the option of not using a sliding wooden patchbox. *** OUT OF STOCK ***
|
|
|
|
|
|  |
BP-800-B Brass Tenn. buttplate in BrassThe most accurate of our Tenn. plates in brass. H=4-3/8" W=1-1/8" CL=2-3/4"
|
|
|
|
|
| |
BP-800-GS Brass Tenn. buttplate in German SilverThe most accurate of our Tenn. plates in German silver. H=4-3/8" W=1-1/8" CL=2-3/4"
|
|
|
|
|
| |
BP-800-I-Steel Tenn. buttplateThe most accurate of our Tenn. plates. H=4-3/8" W=1-1/8" CL=2-3/4"
|
|
|
|
|
|  |
BP-ARM-B John Armstong, Maryland buttplate in brassBP-ARM-B John Armstong, Maryland buttplate in brass. Height = 5", width = 1 1/2", comb length = 2 5/16", comb height = 7/16".
|
|
|
|
|
|  |
BP-ARM-I John Armstong, Maryland buttplate in steelBP-ARM-B John Armstong, Maryland buttplate in steel. Height = 5", width = 1 1/2", comb length = 2 5/16", comb height = 7/16".
|
|
|
|
|
|  |
BP-BECK-B - J.P. Beck / Lebanon - Brass Buttplate An exceptional quality casting from a rifle by gunsmith J.P Beck, Lebanon School. The Beck family was from Lebanon, but built rifles of Lancaster school design. H= 5” W= 1-7/8” CL=2”.
|
|
|
|
|
| |
BP-BECK-I- J.P. Beck / Lebanon - Steel buttplate JP Beck buttplate. A classic Early Pennsylvania Gunsmith in steel. (Formerly #29210). Dimensions are Overall height 5" x 1 7/8" wide with a comb length of 2".
|
|
|
|
|
|  |
BP-BED-B Bedford buttplate in Brass Bedford buttplate in Brass. Height: 4 3/8", Width: 1 3/8", Comb length: 2 1/4". Suitable for Bedford County style, or other delicate long rifles.
|
|
|
|
|
| |
BP-BED-GS Bedford buttplate in German silverBedford buttplate in German silver. Height: 4 3/8", Width: 1 3/8", Comb length: 2 1/4". Suitable for Bedford County style, or other delicate long rifles.
|
|
|
|
|
| |
BP-BED-I Bedford buttplate in ironBedford buttplate in iron. Height: 4 3/8", Width: 1 3/8", Comb length: 2 1/4". Suitable for Bedford County style, or other delicate long rifles.
|
|
|
|
|
|  |
BP-EF-B - Fowler buttplate - brass ***OUT OF STOCK***Brass casting from 1750-1780 period Fowler. H = 5" W = 1 7/8" CL = 5". ***OUT OF STOCK***
|
|
|
|
|
| |
BP-EF-GS - Fowler buttplate - German silverGerman silver casting from 1750-1780 period Fowler. H = 5" W = 1-7/8" CL = 5".
|
|
|
|
|
| |
BP-EF-I - Fowler buttplate - steelSteel casting from 1750-1780 period Fowler. H = 5" W = 1-7/8" CL = 5".
|
|
|
|
|
|  |
BP-FRD-B Freund Jaeger rifle buttplate - brassBrass casting from the Ron Scott collection. This casting was made from a Freund Jaeger rifle. It is elegantly chiseled on the comb with very crisp detail. H = 4 1/4", W = 1 5/8", " CL = 4 1/8". This buttplate is cut out for a sliding wooden patchbox and is part of one of the smallest in size Jaeger furniture sets that Ryan has personally seen. To find all of the items that we offer on this style, type in the name 'Freund' into the white search box, click on send, then click on 'display' to see each item. There is a buttplate, toeplate, cheekpiece, lower cheekpiece, two patch box ends sold as a set, triggerguard, thumbpiece in either brass or German silver, sideplate, a lower and two upper thimbles sold as a set and nosecap. i
|
|
|
|
|
|  |
BP-HAE4-B Early Hawken buttplate in brassEarly Hawken style buttplate in waxcast in brass. Butt length = 4 7/8", butt width = 1 7/16", comb length = 2 3/4", comb width = 1 1/16", comb height = 3/8". Suitable for an early Hawken or other plains style rifles. These castings are very thin - thinner that most of our castings.
|
|
|
|
|
|  |
BP-HAE4-I Early Hawken buttplate in steelEarly Hawken style buttplate in waxcast in steel. Butt length = 4 7/8", butt width = 1 7/16", comb length = 2 3/4", comb width = 1 1/16", comb height = 3/8". Suitable for an early Hawken or other plains style rifles. These castings are very thin - thinner that most of our castings.
|
|
|
|
|
|  |
BP-HAW1-B Late halfstock buttplate in brassLate buttplate in brass. Length = 4 1/2", comb length = 1 7/8", comb width = 1 1/4", comb height = 3/8". Suitable for a late Hawken, Dimick or other plains style rifles.
|
|
|
|
|
| |
BP-HAW1-GS - Late buttplate in German silverLate buttplate in German silver. Length = 4 1/2", comb length = 1 7/8", comb width = 1 1/4", comb height = 3/8". Suitable for a late Hawken, Dimick or other plains style rifles.
|
|
|
|
|
| |
BP-HAW1-I Late buttplate in steelLate buttplate in steel. Length = 4 1/2", comb length = 1 7/8", comb width = 1 1/4", comb height = 3/8". Suitable for a late Hawken, Dimick or other plains style rifles.
|
|
|
|
|
|  |
BP-KLET-B John Klette buttplate in brass *** OUT OF STOCK ***John Frederick Klette was a noted gun maker in the late 1700's. Klette was the master armorer at the Rappahannock Forge in Falmouth, VA during the Revolutionary War, and his home was the crossroads of Stevensburg in Culpeper County, Virginia outside of Fredericksburg. He was also known in the Salem area of North Carolina. Height: 4 7/8", Width: 1 15/16", Comb length: 2 1/4", Comb height: 1/4". Goes with our TG-KLET-B. *** OUT OF STOCK ***
|
|
|
|
|
BP-KLET-GS John Klette buttplate in German silverJohn Frederick Klette was a noted gun maker in the late 1700's. Klette was the master armorer at the Rappahannock Forge in Falmouth, VA during the Revolutionary War, and his home was the crossroads of Stevensburg in Culpeper County, Virginia outside of Fredericksburg. He was also known in the Salem area of North Carolina. Height: 4 7/8", Width: 1 15/16", Comb length: 2 1/4", Comb height: 1/4". Goes with our TG-KLET-GS.
|
|
|
|
|
