24200 - Early thimble set in brass 3/8

Investment cast in brass, for 3/8" ramrod, early thimble set of three (two upper and one lower). We do have a few extra upper thimbles.

24210 - Early thimble set in steel 3/8

Investment cast in steel, for 3/8" ramrod, early thimble set of three (two upper and one lower).

29330 - Bivins Pistol 2 pc. Set - 5/16” Brass

The matching pistol set of thimbles to the Bicentennial rifle above. Available in 3/8” and 5/16”.

29340 - Bivins Pistol 2 pc. Set - 5/16” Steel

29350 - Bivins Pistol 2 pc. Set - 3/8” Brass

3/8" cast brass pistol thimbles. Two piece set.

29360 - Bivins Pistol 2 pc. Set - 3/8” Steel

34160 - Brass French Dragoon Thimbles 5/16

This set consist of the lower entry and one upper for 5/16 rods. From an original 1733 French military dragoon pistol. Original pistol rods were commonly tapered to a tiny 1/4” diameter to aid in the smallest overall body dimensions possible and to more easily pass the forward lock screw.

34165 - Steel French Dragoon Thimbles 5/16

34170 - German Silver French Dragoon Thimbles 5/16

34360 - Brass English Dragoon Thimble Set 5/16

A copy of 1760’s English Dragoon pistol thimbles. Consists of lower entry pipe and one upper thimble in 5/16” European rods always tapered heavily from tip to tip.

34365 - Steel English Dragoon Thimbles Set 5/16

34370 - German Silver English Dragoon Thimble Set 5/16

34560 - Brass Georgian Thimble Set

A copy of 1690 English Georgian pistol thimbles. Consists of lower entry pipe and one upper thimble. The original rod tapered from a 20 gauge tip to a tiny 3/16" diameter. These thimbles are 1/4". My ramrods usually taper from 5/16" at the tip to just under 1/4" at the small end so the 1/4" works out close for the middle of the rod.

34565 - Steel Georgian Thimble Set

A copy of 1690 English Georgian pistol thimbles. Consists of lower entry pipe and one upper thimble. The original rod tapered from a 20ga tip to a tiny 3/16" diameter. These thimbles are 1/4". My ramrods usually taper from 5/16" at the tip to just under 1/4" at the small end so the 1/4" works out close for the middle of the rod.

34570 - GS Georgian Thimbles 1/4

A copy of 1690 English Georgian pistol thimbles. Consists of lower entry pipe and one upper thimble. The original rod tapered from a 20ga tip to a tiny 3/16" diameter. These thimbles are 1/4". My ramrods usually taper from 5/16" at the tip to just under 1/4" at the small end so the 1/4" works out close for the middle of the rod.

34660 - Brass Danish Thimble Set

A copy of 1690’s Danish Gentleman’s pistol thimbles. Consists of lower entry pipe and one upper thimble in 1/4.” Original rod tapered heavily from 5/16" at the tip to 1/4” at the opposite end.

34665 - Steel Danish Thimble Set

A copy of 1690’s Danish Gentleman’s pistol thimbles. Consists of lower entry pipe and one upper thimble in 1/4.” Original rod tapered heavily from 5/16" at the tip to 1/4” at the opposite end.

34670 - GS Danish Thimble Set

A copy of 1690’s Danish Gentleman’s pistol thimbles. Consists of lower entry pipe and one upper thimble in 1/4.” Original rod tapered heavily from 5/16" at the tip to 1/4” at the opposite end.

34760 - Brass Martinoni Thimble Set

A copy of 1700 Italian pistol thimbles. Consists of lower entry pipe and one upper thimble in 1/4”. European rods always tapered heavily from tip to tip.

34765 - Steel Martinoni Thimble Set

A copy of 1700 Italian pistol thimbles. Consists of lower entry pipe and one upper thimble in 1/4”. European rods always tapered heavily from tip to tip.

34770 - GS Martinoni Thimble Set

A copy of 1700 Italian pistol thimbles. Consists of lower entry pipe and one upper thimble in 1/4”. European rods always tapered heavily from tip to tip.

TH-FRD-B Freund Jaeger rifle thimble set 3/8 brass

Set of chiseled thimbles from a Freund Jaeger rifle. 3/8" in brass. Set of two upper and one lower. The inside of these thimbles measures about .380. Upper thimbles are 1 1/2" long. Entry thimble is 4 3/16" long overall. *Limited availability. To find all of the items that we offer on this style, type in the name 'Freund' into the white search box, click on send, then click on 'display' to see each item. There is a buttplate, toeplate, cheekpiece, lower cheekpiece, two patch box ends sold as a set, triggerguard, thumbpiece in either brass or German silver, sideplate, a lower and two upper thimbles sold as a set and nosecap.

TH-POS-B Poser Jaeger rifle thimbles 3/8 brass

Set of chiseled thimbles from a Poser Jaeger rifle. 3/8" in brass. Set of two upper and one lower. The inside of these thimbles measures about .350 , so you will have to sand down a 3/8" ramrod to fit. Overall length of the entry pipe is 3 1/2" with the barrel portion being 1 1/4", OAL of the uppers is 1 1/2".

TH-POS-GS Poser Jaeger rifle thimbles 3/8 German silver (Not yet )

Set of chiseled thimbles from a Poser Jaeger rifle. 3/8" in German silver. Set of two upper and one lower. The inside of these thimbles measures about .350 , so you will have to sand down a 3/8" ramrod to fit. The inside of these thimbles measures about .330, 5/16" ramrod to fit. Overall length of the entry pipe is 3 1/2" with the barrel portion being 1 1/4", OAL of the uppers is 1 1/2". (NOT YET IN STOCK)